Can You Answer All of These Questions an Auto Mechanic Should Know?

By: Justin Cupler
Estimated Completion Time
6 min
Can You Answer All of These Questions an Auto Mechanic Should Know?
Image: shutterstock

About This Quiz

Automotive knowledge is earned, not given. You earn it through countless years of getting grease under your fingernails, banging your knuckles off sharp metal and hammering off rusted bolts while sticking your arm in spaces it really shouldn't fit. This is the life of an automotive mechanic, and there is no way to fake this type of experience. 

Automotive knowledge includes things like basic history and understanding the difference between horsepower and torque, but there is a whole other side of cars that is foreign to many car lovers. I'm talking about the mechanical side of them, like how the engine actually creates its power, how the air conditioner cools a vehicle and why coolant is always such a bright color. These are all questions automotive mechanics should be able to answer in their sleep. 

Any gearhead or car junkie can call themselves an automotive expert, but a true car expert understands the mechanics of the vehicles they love so much. Do you think you have the automotive knowledge of an auto mechanic? Give this test a shot to see how much you know about auto mechanics and the inner workings of cars. 

After any suspension or chassis work, a vehicle needs what?
An alignment
A pat on the taillights and a "good job."
Tire rebalancing
New tires
Correct Answer
Wrong Answer

After disassembling the chassis or suspension, the alignment will be way off. Performing an alignment after any suspension or chassis work is a requirement. Without this, the vehicle may be unsafe to drive.

Advertisement

What are the telltale signs of internal transmission issues?
Black transmission fluid, burned fluid smell and sticky transmission fluid
Bright red transmission fluid
Smooth-feeling transmission fluid
Overheating, stalling and electrical issues
Correct Answer
Wrong Answer

Any mechanic can identify internal transmission issues from the fluid alone. Black fluid indicates worn-out internal clutches. Sticky fluid indicates overheating. Smelly fluid indicates high heat that caused the fluid to burn.

Advertisement

What is a telltale sign for overinflated tires?
Excessive wear in the center of the tread
A broken sidewall
Frequent flat tires
Excessive wear on the outer tread
Correct Answer
Wrong Answer

An overinflated tire tends to bulge in the center of the tread. This puts most of the car's weight on this center section and causes it to wear out prematurely.

Advertisement

What is the correct pattern for torquing a wheel?
A clockwise circle
A counterclockwise circle
Just tighten them at random.
A crisscross pattern
Correct Answer
Wrong Answer

You should always tighten lug nuts in a crisscrossing pattern. This ensures you tighten the wheel evenly and avoid stretching or weakening the wheel studs.

Advertisement

What is a Road Force balancer?
A workout machine that keeps mechanics fit
A new side of the force between the light and dark
A special tire machine that balances tires more effectively
Your everyday neighborhood tire-balancing machine
Correct Answer
Wrong Answer

A Road Force balancer is a special machine that applies force to the tread of the tire for more effective balancing. It can also detect flaws in a rim and tire, and recommend match-mounting the tire and wheel to offset these imperfections.

Advertisement

What’s it mean to “turn” a rotor?
Putting it on a brake lathe and removing its imperfections
Rotating it on the hub
To spin the rotor
To pull an emergency brake turn after doing a brake job
Correct Answer
Wrong Answer

Turning a rotor means to put it on a lathe and shave off small amounts of material to remove any imperfections. This helps prevent vibration and decreases stopping distances by giving the brake pads a rough surface to grip. Every brake job should include turning or replacing the rotors.

Advertisement

What is a parasitic draw?
An automotive mosquito that prefers gas to blood
A slow fuel leak
A cooling-system leak
A small electrical draw that can kill your battery overnight
Correct Answer
Wrong Answer

A parasitic draw is a small electrical issue that pulls a small amount of power from your battery when the vehicle is off. Under normal operation, you likely won't notice an issue, but if it sits overnight or for a few days, it could kill the battery.

Advertisement

What is the name of the orange-colored coolant General Motors cars use?
Agent Orange
Dex-Cool
Coolant Orange
Doesn't have a name
Correct Answer
Wrong Answer

GM began using Dex-Cool -- a silicate-free, orange-colored coolant -- in the 1990s. While this coolant was supposed to be a longer-lasting alternative to the green stuff, there have been numerous complaints and lawsuits surrounding corrosion and co0ling-system clogs causing major damage.

Advertisement

A car comes in with a slipping transmission and the customer wants a transmission flush. What should you do?
Do the flush -- it's the customer's issue.
The flush will fix the issue, so do it.
Recommend the customer have the transmission checked out and advise against doing the flush.
Only do the flush if the customer signs a waiver.
Correct Answer
Wrong Answer

When a transmission starts slipping, this means there is already internal damage. Forcing new fluid into the transmission can actually cause more damage or even lead to complete transmission failure.

Advertisement

Transmission fluid has three main functions. What are they?
Lubricate, clean, and provide hydraulic pressure
Flow, flush and clear
It only has two functions.
Pressurize, shift, and reverse
Correct Answer
Wrong Answer

The transmission fluid not only lubricates the transmission's moving parts, but it also acts as the hydraulic fluid and washes away any loose debris. Failure of any one of these functions can result in serious transmission damage.

Advertisement

What’s the significance of the D.O.T. number on a tire?
It tracks your mileage and send it to the insurance company.
It is registered to your vehicle.
It tells you the tire size.
It indicates the factory that built the tire, its batch number and manufacture date.
Correct Answer
Wrong Answer

The D.O.T number shows the factory and batch numbers, and the manufacture date of your tires. This way you know how old they are and the manufacturer can easily issue recalls for select batches of tires.

Advertisement

What is a directional tire?
A tire that can go any direction
A tire that can rotate only one direction
There is no such thing.
A tire that only works for left-handed people
Correct Answer
Wrong Answer

A directional tire's tread is designed to only roll one direction. These are typically high-performance tires with asymmetrical tread patterns. These tires will have an arrow pointing in the direction they are supposed to roll.

Advertisement

What are the three main types of brake pads?
Good, better and best
American, import and custom
Organic, semi-metallic and ceramic
OEM, aftermarket and performance
Correct Answer
Wrong Answer

They are organic, semi-metallic and ceramic. Organic pads are typically cheapest, and are a mixture of natural materials, like glass, rubber and more. Semi-metallic pads mix in metallic fibers for longer life and better stopping power. Ceramic pads replace the metal fibers with ceramic ones to reduce brake dust.

Advertisement

What should you always wear when installing a replacement light bulb?
Protective goggles
A backward baseball cap
Polarized sunglasses
Rubber gloves
Correct Answer
Wrong Answer

The oils on your fingers can transfer to the light bulbs on installation. These oils can get very hot and cause the bulb to burn out prematurely. Wearing gloves can prevent this transfer of oil.

Advertisement

The enemy of a rusty bolt is?
Muriatic acid
A big hammer
Heat
A big wrench
Correct Answer
Wrong Answer

Rusty bolts are the bane of a mechanic's existence, but they are not impossible to work with. Most shops keep a torch handy to heat up these bolts and break down the seemingly impossible bond the rust has created. After heating the bolt, it should come out under normal pressure.

Advertisement

Can you easily adjust every vehicle’s camber, caster and toe?
No, many vehicles require aftermarket bolts or shims to adjust all three angles.
Yes, they are all fully adjustable.
Yes, but you need a special tool.
Yes, but only with certain alignment machines.
Correct Answer
Wrong Answer

Almost every vehicle has quick toe adjustment, but camber and caster may require special bolts or shims to get right. Most parts stores stock these items. In some cases, the only way to fix severe issues is with new parts.

Advertisement

How do you compress the piston in most rear calipers?
A really big hammer
By hand
With a special rear-caliper tool
a big C-clamp
Correct Answer
Wrong Answer

Most rear calipers use a screw-style piston to activate the parking brake. This piston requires a delicate combination of clockwise rotation and inward pressure to compress it. The only way to effectively do this is with a special rear-caliper tool. Many auto parts stores rent these tools to DIYers.

Advertisement

A customer complains about a mild drift to the right, does his car likely need an alignment?
No, there is a good chance he is feeling the normal slope in the road for rain drainage.
Yes, he needs one immediately.
No, it is a bad tire.
Yes, his camber is clearly out of whack.
Correct Answer
Wrong Answer

Most major roadways have a peak in the middle and mild slopes downward on the edges. This can cause a car to drift slowly to the right. It is still a great idea to check his alignment, but make sure to set this expectation of the mild drift.

Advertisement

Will an alignment issue cause a vibration?
Theoretically, yes, but this is highly unlikely.
Alignments can never cause vibration issues.
Yes, alignments are the main cause of vibrations.
Only if it's bad camber
Correct Answer
Wrong Answer

While an alignment can technically cause a vibration in some instances, these are very rare occurrences. Vibrations typically stem from tire or braking issues. It's always worthwhile to check the alignment, but you will also want to check the tires and brakes.

Advertisement

In the mid-1990s and early-2000s, Chrysler was famous for hiding car batteries where?
Inside the front wheel well
In the trunk
Under the engine
Under the driver's seat
Correct Answer
Wrong Answer

In its midsize sedans from the mid-1990s through the early-2000s, Chrysler saved room under the hood by putting the battery in the wheel well. To access the battery, you had to turn the wheel to one side and peel back the wheel-well cover.

Advertisement

What is the correct brake-bleeding sequence?
Front-right, front-left, rear-right and rear left
Front to rear
Doesn't matter
Every car is different.
Correct Answer
Wrong Answer

Each model's brake system is different, so their brake hoses route in different ways. This means each model of vehicle will have a different brake-bleeding procedure. You must do this in the right sequence or risk reintroducing air into the brake system.

Advertisement

You’ve got a car throwing an “EVAP Leak” code. What is the first thing you check?
Check the fuel cap.
Tear down and rebuild the engine.
Charge a $3,000 diagnostic fee.
Check all hoses and tubes.
Correct Answer
Wrong Answer

An "EVAP" code means there is a vacuum leak in the evaporative emissions system, and the fuel tank is part of this system. Oftentimes, drivers will refill their fuel tank and forget to tighten the cap, which may trigger a check engine light with an "EVAP" diagnostic code. This does not mean this code always points toward a fuel cap, but it is the best place to start.

Advertisement

With any electrical problem in a vehicle, what is the first thing you check?
Remove the battery.
Unplug everything.
Turn off the radio.
Check the fuses and relays.
Correct Answer
Wrong Answer

Blown fuses and relay sometimes cause the most frustration for any tech chasing down what appears to be a mystery electrical issue. Starting at the fuse and relay block can eliminate the frustration of finding out you spent three hours chasing an issue that ended up being just a blown fuse or faulty relay.

Advertisement

A car is overheating, and the upper radiator hose is significantly cooler than the lower hose. What’s the likely issue?
Failed thermostat
Blown hose
Low on coolant
Bad water pump
Correct Answer
Wrong Answer

If the thermostat fails and does not let the coolant flow back into the radiator, the engine will overheat but the upper radiator hose will remain dramatically cooler than the lower hose because no coolant will flow through it.

Advertisement

A customer asks for a free diagnostic scan, and you turn up a “random misfire” code. What is your next step?
Tell the customer there is nothing you can do.
Ship the car to the dealership.
Request a per-hour diagnostic fee.
Let the car sit for a few days and ignore the customer's calls.
Correct Answer
Wrong Answer

A free diagnostic is purely to give you an idea of where to start, and a "Random Misfire" code can lead you down several paths. The safest bet is to get a per-hour diagnostic approval so you can find the source of the problem and fix it the right way.

Advertisement

Some performance vehicles -- particularly German ones -- require this to perform an alignment.
Metric wrenches
Custom-made weights
Specially weighted sand bags
Wiener schnitzel
Correct Answer
Wrong Answer

Many performance cars, especially German ones, have their suspensions tuned for carrying passengers and still delivering top-notch performance. This means an alignment technician must simulate the weight of the passengers and driver in the car. They do this using special sand bags.

Advertisement

What other components should you always replace when doing a timing belt?
Nothing. The timing belt is expensive enough.
Items driven by or contacting the belt, including the pulleys, water pump, and timing belt tensioner.
Just the timing belt seal
Serpentine belt
Correct Answer
Wrong Answer

The timing belt is one of the most sensitive and expensive belts in your vehicle. While replacing it, it is best practice to also replace all the timing belt pulleys, tensioners and the water pump. This helps prevent other problems in the area from damaging the expensive repair you just did.

Advertisement

A customer brings in already-balanced aftermarket wheels and tires for you to install. What do you need to add to prevent vibrations?
Sand the treads
New lug nuts
Hub centric rings
You must rebalance the tires.
Correct Answer
Wrong Answer

Every manufacturer's hubs are different diameters, and installing wheels directly onto these hubs can cause vibrations. Hub centric rings sit inside the hub of the aftermarket wheels and fit snugly over the manufacturer's hub, preventing vibrations.

Advertisement

Is a tire plug a reliable repair method?
It is a temporary fix only.
Yes, a plug is a quick and permanent solution.
Only if you do it right
Yes, but only certain tires work with them.
Correct Answer
Wrong Answer

Plugs are great for quick on-the-road repairs, but they are not a permanent solution. The only permanent repair for a punctured tire is an internal patch bonded to the tire itself.

Advertisement

A car’s A/C is blowing warm, and you find it is low on refrigerant. Will refilling the system fix the problem?
Sure, as long as it blows cold after refilling it, you are good.
No, a low refrigerant level means there is a leak. You must fix the leak.
Yes, it is normal for A/C systems to use refrigerant.
Yes, you have to top up the A/C every few years.
Correct Answer
Wrong Answer

A/C systems should never leak refrigerant, as they are sealed systems. If the refrigerant level is low, there is a leak somewhere and refilling a leaking A/C system is actually a violation of federal law.

Advertisement

What are torque sticks?
A game mechanics play during down time
Sticks that attach to an impact gun to limit their torque when tightening lug nuts
Wrenches you use to tighten wheels
A tasty snack you can only get at auto shops
Correct Answer
Wrong Answer

Torque sticks attach to an impact gun like any other socket. The socket is at the end of a long, thin stem that varies in size to help limit the amount of torque transfer from the gun to the lug nut. This allows mechanics to quickly reinstall wheels without worrying about overtightening them.

Advertisement

What is a telltale sign of underinflated tires?
Excessive wear in the middle of the tread
Excessive wear on the outer edges of the tread
A damaged sidewall
Choppy tire wear
Correct Answer
Wrong Answer

Underinflated tires tend to sag in the center, putting all the weight on the outer edges of the tires. This causes excessive wear on the outer edges of the tread.

Advertisement

A timing belt broke, is the engine toast?
Only if it is an interference engine
Possibly, but you will not know for sure without a full inspection.
No, everything is OK.
No, as long as you replace it quick enough.
Correct Answer
Wrong Answer

Timing belts in interference engines -- those with very tight tolerances -- can cause valve damage if they break during operation. That said, a broken timing belt is not a death sentence. A full inspection may prove there was no valve damage.

Advertisement

What is the typical cause for vibration while braking?
Warped rotors
Sticking caliper
Brake pad material transfer
Faulty brake pedal
Correct Answer
Wrong Answer

While people are quick to say, "My rotors are warped," they fail to realize just how hard it is to actually warp them. Typically, vibration when braking is from brake pad material transferring from the pad to the rotor due to high heat. A quick rotor resurfacing generally fixes the issue.

Advertisement

What is a non-serviceable rotor?
A rotor that you cannot resurface
A rotor that doesn't work
An out-of-round rotor
A soft rotor
Correct Answer
Wrong Answer

Non-serviceable rotors are ones you cannot resurface on a brake lathe. Whether it's because the rotors are manufactured within tighter tolerances or just made of a metal that cannot be resurfaced, you have to replace them every time you replace the pads. You'll typically find these on performance and foreign cars.

Advertisement

You Got:
/35
shutterstock