1. Plumbing tool
2. Automotive restoration tool

A clogged sink drain be quite annoying but it is usually a very easy problem to fix – if you have a sink plunger. Compared to a toilet plunger, the sink plunger has a shallower dome and a flat rim.

1. Plumbing tool
2. Automotive restoration tool

Fasteners which hold both interior and exterior trim in place are not normally easy to see. Once they are located, it is important to use the proper tool to remove them in order to avoid any gouging or marring of the material around them.

1. Plumbing tool
2. Automotive restoration tool

Butt welding clamps are used to hold two pieces of sheet metal together during the welding process. They work very well at ensuring the two sheets are aligned perfectly end-to-end and surface-to-surface.

1. Plumbing tool
2. Automotive restoration tool

The pipe bending spring is an easy way to bend copper pipes. The internal pipe bending spring is placed inside the pipe which is to be bent. With an external pipe bending spring, however, the pipe to be bent is placed inside it.

1. Plumbing tool
2. Automotive restoration tool

A faucet handle sometimes becomes so corroded that it is extremely difficult to remove in order to replace it. The simplest way to deal with a stuck faucet handle is to remove it cleanly with the corkscrew action of a faucet handle puller.

1. Plumbing tool
2. Automotive restoration tool

Trowels come in a variety of shapes, including triangular, rounded, rectangular, flat and scooped out. A trowel comes in very handy when a plumber has to uncover pipes and connections buried just below the ground.

1. Plumbing tool
2. Automotive restoration tool

Some suction cup dent pullers work best with small dents while others are meant to be used on dents which cover a large area. Apart from the suction cup dent puller, there are also glue kits which can be used to pull out dents.

1. Plumbing tool
2. Automotive restoration tool

The telescopic basin wrench is used to get at nuts in recessed areas underneath a basin or bath. It would be difficult, or nearly impossible, for an ordinary basin wrench to get into these areas to loosen or tighten the fastener.

1. Plumbing tool
2. Automotive restoration tool

The engine crane goes by several other names, including engine lifter and engine hoist. The boom (or arm) on some engine cranes is adjustable, making it possible for the crane to lift a wider range of load limits.

1. Plumbing tool
2. Automotive restoration tool

The toilet plunger may be extremely simple in design (a suction cup with a handle), but it is an indispensable tool for a plumber to have. So much so, in fact, that the toilet plunger is often called the “plumber’s friend.”

1. Plumbing tool
2. Automotive restoration tool

The floor jack typically has four wheels or casters, so it can easily be moved into the exact position where it is needed. It is designed with a low profile and there are some models which are even lower than normal for use on low-riding vehicles.

1. Plumbing tool
2. Automotive restoration tool

Sink plugs come in two basic types. The first is a rubber stopper which fits in the drain and is normally attached to a chain. The other is the pop-up sink plug which is usually made of metal and is operated by a lever mechanism fitted under the sink.

1. Plumbing tool
2. Automotive restoration tool

Technically, thread seal tape is known as polytetrafluoroethylene film tape and is sometimes referred to by the letters (PTFE). Thread seal tape is usually color coded as an indication of the type of pipe it can be used on.

1. Plumbing tool
2. Automotive restoration tool

The drain-cleaning bladder, or blow bag, is one option a plumber can try when faced with a blocked drain. It is normally attached to a garden hose, then placed inside the drain. When the water is turned on, the bladder will fill up with water to a certain pressure and release it with great force which may be sufficient to dislodge clogs.

1. Plumbing tool
2. Automotive restoration tool

An air-powered needle scaler is often the ideal tool for removing rust, dirt and grime from auto parts. The needles, or tentacles, on the scaler remove the unwanted layers without damaging the metal they are stuck to.

1. Plumbing tool
2. Automotive restoration tool

Jack stands hold a vehicle safely off the ground while mechanical work is being done on it. It is very important that the weight capacity of each jack stand is rated as sufficient for the size of the vehicle it is helping to hold up.

1. Plumbing tool
2. Automotive restoration tool

The heating element in a hot water cylinder can become corroded and damaged over time. The immersion heater wrench is used to remove the element and replace it with a new one. Immersion heater wrenches can be made flat; with an offset handle (called cranked); or in a box ring design.

1. Plumbing tool
2. Automotive restoration tool

The chain on a soil pipe cutter can provide sufficient pressure to cut through round or irregularly shaped pipes made of cast iron, concrete or clay. The tool is particularly useful when the pipe to be cut is located in a confined space.

1. Plumbing tool
2. Automotive restoration tool

The metal shrinker stretcher is used to create inward or outward curves in metal. A shinker and a stretcher are sometimes sold in a set as separate tools but there are some brands which combine the shinker and stretcher into one tool with interchangeable parts.

1. Plumbing tool
2. Automotive restoration tool

Metal Inert Gas (MIG) welding was first developed during the Second World War. It is a high-temperature electrical welding technique which is easier to master than most other forms of welding and which is good for forming joints which are strong and durable.

1. Plumbing tool
2. Automotive restoration tool

A worn valve seat will no longer make a tight seal and can result in a leaky faucet. The faucet valve seat wrench can be used to remove the worn seat and then tighten the new seat in place.

1. Plumbing tool
2. Automotive restoration tool

Bottle jacks may not be as maneuverable as floor jacks, but they do have some advantages. These include having a smaller footprint and having a generally larger lifting capacity.

1. Plumbing tool
2. Automotive restoration tool

The valve or tap which cuts off mains water supply to a house can be easily turned on or off with a water meter key. The tool is sold with either a square head or a U-shaped crutch head but there are also combination water meter keys which incorporate both.

1. Plumbing tool
2. Automotive restoration tool

Pop-up or pop-out (PO) plugs in a sink, basin or tub can be easily removed with a PO plug wrench. The four-arm is design ensures that the tool can be used with different styles of plugs and drain strainers.

1. Plumbing tool
2. Automotive restoration tool

An engine stand is used to hold an engine which has been removed from a vehicle. One the engine is on the stand and securely bolted in place, it can be safely worked on. Many engine stands allow the engine to be easily rotated so that the mechanic can get to all the parts which need to be attended to.

1. Plumbing tool
2. Automotive restoration tool

The rivet dimpler creates small indentation which helps to keep the rivet out of sight once it is in place. It is much easier to further conceal the rivet if the rivet dimpler is used before setting the rivet in place.

1. Plumbing tool
2. Automotive restoration tool

Metal forming dollies are used when shaping sheet metal. They are placed on one side of the sheet which is then struck on the other side with an auto body hammer to work the metal into the desired shape.

1. Plumbing tool
2. Automotive restoration tool

Auto body hammers can be used in conjunction with metal forming dollies to shape sheet metal. They are also useful for popping dents and creases out of metal.

1. Plumbing tool
2. Automotive restoration tool

It is not uncommon for one end of a pipe to break off in the end of another pipe. Unless you have a pipe extractor, it can be difficult to remove the broken piece without damaging the intact pipe and its threading.

1. Plumbing tool
2. Automotive restoration tool

This wrench is inserted into the basket strainer from beneath the sink to hold it firmly in place while the basket strainer lock nut is being loosened or tightened. It can be used on different types of basket strainers since its two ends are not identical.

1. Plumbing tool
2. Automotive restoration tool

Auto body sanding blocks are vital tools to have in order to ensure that a vehicle’s new paint job look’s professionally done. The blocks are used for color sanding and buffing, as well as for shaping areas where body filler was used.

1. Plumbing tool
2. Automotive restoration tool

The PEX crimping tool is used to squeeze a copper crimp ring around the end of a PEX pipe where a fitting has been inserted. This helps to ensure that a watertight seal is created between the two parts. There is also a de-crimping tool for use in cases where the copper ring needs to be removed without causing any damage to the pipe.

1. Plumbing tool
2. Automotive restoration tool

A transmission is long, heavy, bulky and likely to be damaged by being improperly handled and stored. The transmission stand is a safe and secure place to hold a cumbersome transmission while it is being worked on and until you are ready to put it back into the vehicle.

1. Plumbing tool
2. Automotive restoration tool

A timing light can be used to fine tune the timing of the spark plugs in older model vehicles which use a distributor. Poor timing can lead to low gas mileage and loss of power from the engine.

1. Plumbing tool
2. Automotive restoration tool

The tub drain wrench is used both when removing a damaged drain and when fitting in a new one. The two ends are different sizes so that the wrench can be used on different size drains.

1. Plumbing tool
2. Automotive restoration tool

The basket strainer lock nut holds the basket in place and has to be removed before the strainer can be removed and replaced. A large wrench can sometimes work on this lock nut but the perfect tool for the job is the basket strainer lock nut wrench

1. Plumbing tool
2. Automotive restoration tool

There are times when replacing a rusted or damaged panel is not an option – perhaps because a replacement is expensive or simply not available. In those cases, a patch can be created by using a punch and flange tool. The patch can then be welded into the area where the damaged section was removed from the panel.

1. Plumbing tool
2. Automotive restoration tool

When a panel from a vehicle is too damaged to repair and cannot be sourced anywhere, then it becomes necessary for the automotive restorer to make it. One machine which helps to do this is the box and pan brake or finger brake. It is large, free-standing and expensive but is also an indispensable piece of equipment.

1. Plumbing tool
2. Automotive restoration tool

Any engine which has been rebuilt or dormant for a long time should be sufficiently primed (pre-oiled) before running again. A dry start (without priming) can cause severe damage to the engine.

1. Plumbing tool
2. Automotive restoration tool

The drain snake, a type of auger, is used to unclog a basin or toilet drain. It is typically able to clear clogs which cannot be handled by a plunger. There are motorized versions of the drain snake which require less physical effort from the user.